unisonic technologies co., ltd ug4j npn silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2005 unisonic technologies co., ltd qw-r222-001,a emitter common (dual digital transistors) features * two dtc114t chips in a sot-353 package. sot-353 4 5 3 2 1 *pb-free plating product number: ug4jl ordering information order number pin assignment normal lead free plating package 1 2 3 4 5 packing UG4J-AL5-R UG4J-AL5-R sot-353 b1 e1,e2 b2 c2 c1 tape reel ug4jl-al5-r (1)packing type (2)package type (3)lead plating (1) r: tape reel (2) al5: sot-353 (3) l: lead free plating, blank: pb/sn marking information ug4j lead plating
ug4j npn silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r222-001,a absolute maximum rating (ta=25 ) parameter symbol ratings unit collector-base voltage v cbo 50 v collector-emitter voltage v ceo 50 v emitter-base voltage v ebo 5 v collector current i c 100 ma total power dissipation p d 150(note1) mw junction temperature t j +150
storage temperature t stg -40 ~ +150
note 1. *120mw per element must not be exceeded. 2. absolute maximum ratings are those values beyond which the device c ould be permanently damaged. absolute maximum ratings are stress ratings onl y and functional device operat ion is not implied. electrical characteristics (ta=25 ) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =50a 50 v collector-emitter breakdown voltage bv ceo i c =1ma 50 v emitter-base breakdown voltage bv ebo i e =1ma 5 v current cutoff current i cbo v cb =50v 0.5 a emitter cutoff current i ebo v eb =4v 0.5 a collector-emitter saturation voltage v ce(sat) ic/ib=10ma/1ma 0.3 v dc current transfer ratio h fe v ce =5v, i c =1ma 100 250 600 transition frequency f t v ce =10v, i e =-5ma, f=100mhz* 250 mhz input resistance r 1 7 10 13 k ? note * transition frequency of the device. equivalent circuit r 1 r 1 (3) (2) (1) (4) (5) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
